Joint impact of CEE and IQI on NOMA with full-duplex relaying system

Wireless Networks - This paper considers the performance of non-orthogonal multiple-access (NOMA) with full-duplex (FD) relaying system in the presence of two practical undesirable defects, namely...     

Preparation of transparent BaSO4 nanodispersions by high-gravity reactive precipitation combined with surface modification for transparent X-ray shielding nanocomposite films

BaSO₄ nanoparticles as important functional materials have attracted considerable research interests, due to their X-rays barrier and absorption properties. However, most of BaSO₄ nanoparticles prepared by traditional technology are nanopowders with broad size distribution and poor dispersibility, which may greatly limit their applications. To the best of our knowledge, the synthesis of transparent BaSO₄ nanodispersions was rarely reported. Here, we firstly present a novel and efficient method to prepare transparent and stable BaSO₄ nanodispersions with a relatively small particle size around 10 to 17 nm using a precipitation method in a rotating packed bed (RPB), followed by a modification treatment using stearic acid. Compared with the BaSO₄ prepared in a traditional stirred tank, the product prepared using an RPB has much smaller particle size and narrower size distribution. More importantly, by using RPB, the reaction time can be significantly decreased from 20 min to 18 s. Furthermore, the transparent BaSO₄-polyvinyl butyral nanocomposite films with good X-ray shielding performance can be easily fabricated. We believe that the stable BaSO₄ nanodispersions may have a wide range of applications for transparent composite materials and coatings with X-ray shielding performance for future research.     

电力变压器纳米绝缘油的击穿与介电性能研究

绝缘油是电力系统电力变压器的绝缘与散热介质,其性能直接关系到变压器的绝缘性能,而通过向变压器油中加入纳米粒子可提升变压器油的性能指标。通过向绝缘油中加入纳米粒子,制备了纳米绝缘油,在常温下测量了纳米绝缘油的击穿电压、相对介电常数、介质损耗因素及体积电阻率。结果表明,加入纳米粒子后的绝缘油击穿电压有明显提高,低频下的相对介电常数与体积电阻率也有所增加,而低频下的介质损耗因素有略微下降。。     

User idea implementation in open innovation communities: Evidence from a new product development crowdsourcing community

In collaborative crowdsourcing communities for open innovation, users generate and submit ideas as idea co‐creators. Firms then select and implement valuable ideas for new product development. Despite the popularity and success of these open innovation communities, relatively little is known about the factors that determine the implementation of the user‐generated ideas. Based on research on individual creativity, we propose a conceptual model integrating users' previous experience, idea presentation characteristics and feedback valence to explain the likelihood of idea implementation. We validate our research model with a panel data analysis of 43 550 ideas submitted by 16 360 users in the MIUI new product development community hosted by Xiaomi, a large electronics manufacturing company in China. We find an inverted U‐shaped relationship between users' past successful experience and idea implementation. Furthermore, the length of ideas is positively associated with the likelihood of idea implementation. There is also an inverted U‐shaped relationship between supporting evidence and idea implementation. Finally, we demonstrate the negative effect of positive feedback and the positive effect of negative feedback on idea implementation. These findings offer rich insights to understand the phenomenon of open innovation better. Theoretical and practical implications are discussed.     

山东栖霞—大柳行地区金矿找矿靶区地质评价及优选

栖霞—大柳行地区位于胶东中部栖霞—蓬莱金矿成矿带内，是胶东重要的金成矿区，成矿条件优越。为了对圈定靶区进行优选分类，通过对该区地质背景、找矿靶区评价、找矿靶区优选方面展开综合研究，并结合勘查工作程度和矿业权设置情况，划分出3类预测区，选定了5个靶区为今后优先部署勘查工作的方向。     

基于灰色关联度的微孔端面机械密封开启力共性影响参数分析

目前微孔端面机械密封采用的几何参数繁多,缺乏明确物理意义。为找出跨孔型的共性几何参数,基于Fluent多相流空化模型,针对矩形孔、菱形孔、椭圆孔端面机械密封,建立密封间隙流体的三维数值计算模型,计算得到144条开启力数据;在分析开启力和几何尺寸之间的关系、额外开启力产生机制的基础上,提出等效长度和等效宽度2个具有物理意义的几何参数;采用灰色关联度分析法,分析和验证等效长度、等效宽度、方向角、面积比对开启力的影响,发现4个因素对3种微孔密封的间隙流体开启力都有影响,但等效长度与等效宽度的影响较方向角、面积比大。     

Low Li ion diffusion barrier on low-crystalline FeOOH nanosheets and high performance of energy storage

Nano Research - To obtain symmetric supercapacitors (SCs) with high energy density, it is critical to fabricate an electrode with wide potential window and excellent capacitive performance. Herein,...     

基于MOFs在体育场顶棚用新材料氨基功能化的应用

针对体育场用顶棚用材质,因其所处环境恶劣复杂,常年风吹日晒以及高强度的冲击性能,对材质的韧性及强度要求极高,本文以金属有机骨架材料作为平台,设计合成了氨基功能化的Cu3(BTC)2,并对合成的材料进行XRD表征分析、FT-IR表征、材料形貌和结构表征、孔径结构的表征,最后以苯甲醛和氰基乙酸乙酯的缩合反应作为反应底物,考察了合成材料以碱为催化剂的催化反应能力。结果,多次碱催化反应后,材料的结构发生了变化,材料性能得到优化。     

长管拖车缠绕气瓶纤维层冲击损伤的数字射线检测

采用缠绕气瓶替代钢制无缝气瓶是长管拖车轻量化的重要手段之一,但对于缠绕气瓶缠绕层因冲击造成的内部损伤,目前仍缺少成熟有效的检测手段。采用数字射线检测方法,针对玻璃纤维缠绕层冲击损伤造成的分层和危害较大的纤维断裂进行了试验研究。试验表明,采用数字射线检测能够有效检测最小深度为0.5 mm模拟纤维环向断裂刻槽和0.25 mm的模拟纤维轴向断裂刻槽;此外,还通过试验验证增加补偿块的方式,能极大地改善缠绕层分层部位的一次切向透照成像质量,进而提高检测效率。